Shanghai Sunland Industrial Co., Ltd is the top manufacturer of Personal Protect Equipment in China, with 20 years’experience. We are the Chinese government appointed manufacturer for government power,personal protection equipment , medical instruments,construction industry, etc. All the products get the CE, ANSI and related Industry Certificates. All our safety helmets use the top-quality raw material without any recycling material.
Traffic police don't wear safety helmet
We provide exclusive customization of the products logo, using advanced printing technology and technology, not suitable for fading, solid and firm, scratch-proof and anti-smashing, and suitable for various scenes such as construction, mining, warehouse, inspection, etc. Our goal is to satisfy your needs. Demand, do your best.
Professional team work and production line which can make nice quality in short time.
The professional team provides 24 * 7 after-sales service for you, which can help you solve any problems
MASK, OVERCAST STITCHING (Cut.) ,Installing, the ,Hood, Section 1. Open the ,hood,. Fit the corners of the ,mask, (,hood, section) around the ,hood,. Adjust the ,mask, so that it fits smoothly over the edges. Attach six hooks to each hole (large hole) on the ,hood,.
SECTION 1 − WELDING ,HELMET, SAFETY PRECAUTIONS − READ BEFORE USING ,helmet, 2010−03 Protect yourself and others from injury — read and follow these precautions. 1-1. Symbol Usage DANGER! − Indicates a hazardous Indicates special instructions. situation which, if not avoided, will result in death or serious injury.
TILT:Tilt adjustment is located on right side of helmet. Loosen the right headgear tension knob and push the top end of the adjustment lever outward until the lever’s Stop Tab clears the notches. Then rotate the lever forward or back to the desired tilt position.
To install the 386 you will need to remove the head gear from your helmet and replace it using the hardware supplied with the 386.. Once the 386 is installed in your helmet you then place the band over you hard hat with the spring facing to rear.. Then the tabs simply clip over the edge of the hard hat
An alternative to invasive ventilators – ,helmet, based ventilation – already being used outside of the United States, is starting to get noticed in communities who are getting hit hard by the virus, according to Mike Malone of Amron International. The company, based out of Vista, Calif., was founded in 1978, manufacturing commercial diving equipment.
Page 15: Section 7 − ,Installing, Optional Magnifying Lens SECTION 7 − ,INSTALLING, OPTIONAL MAGNIFYING LENS SECTION 8 − MAINTENANCE NOTICE − Never use solvents or abrasive cleaning detergents. NOTICE − Do not immerse the lens assembly in water. The ,helmet, requires little maintenance. However, for best performance clean after each use.
Hood Installation, Part 1. ,Hood Installation, Part 2. ,Hood Installation, (Final) Removal of Film. We've had some questions on how to identify which film is Ventureshield, Scotchgard and Scotchgard Pro. We've put together this video to show what each film looks like and the backing paper/logos.
The higher edge with a lip faces the front of the hood. Hold the filter with the lines running vertically and filter knobs facing out of the hood, and lift into position. Some older hood models have clips, not knobs, but install the same way. Angle the top edge of the filter into place, then while pressing up, rotate the bottom edge into position.